Cyano Acrylates – Jindal Chemicals

Fevikwik PD-99

Jindal — Thu, 04 Jan 2018 09:07:19 +0000

Fevikwik PD-99 is a fast setting, cyanoacrylate adhesive used for very close fitting parts or components that can be bonded by the wicking ability of the product.

Features

Low viscosity
Very fast cure speed

Technical Specification

Appearance: Clear transparent liquid
Viscosity: Approximately 1 to 5 cP
Gap fill: 0.05 mm
Flash point: Minimum 85° C
Shelf life: 9 months
Specific gravity: 1.06
Shear strength MS to MS: 80 kg/cm²
Operating temperature : -40 to 80° C

Fevikwik 702 F

Jindal — Thu, 04 Jan 2018 09:01:30 +0000

Fevikwik 702 F is a cyanoacrylate adhesive with medium viscosity and medium setting velocity. It is widely used for bonding a variety of substrates and is ideally suited for bonding metal to plastics and various other combinations.

Fevikwik 700

Jindal — Thu, 04 Jan 2018 08:58:54 +0000

fitting parts or components. Bonding is effective due to the wicking ability of the product.

Features

Fast setting
Ease of application
Good penetration in close fitting parts

Technical Specification

Appearance: Clear transparent liquid
Viscosity at 25^o C: 1 to 5 cP
Flash point: > 85^o C
Specific gravity: 1.06 approx.
Operating temperature: – 40^o C to 80^o C
Gap fill: 0.05 mm
Cure speed: Metal to Metal: < 10 Seconds, Plastic to Plastic: < 5 Seconds, Rubber to Rubber: < 3 Seconds
Shear strength, M.S.to M.S.: > 80 Kg/cm²

Fevikwik 454

Jindal — Thu, 04 Jan 2018 08:55:28 +0000

Fevikwik 454 is a high strength cyanoacrylate adhesive used for difficult to bond materials where uniform stress distribution and high strength is required. It provides rapid bonding for a wide range of materials, including metals, plastics, and elastomers. The gel consistency prevents the adhesive from flowing even on a vertical surface.

Features

Gel consistency
Fast setting
Ease of application
Applicable on vertical surfaces

Technical Specification

Appearance: Clear to slightly cloudy, colourless to straw coloured gel
Chemical type: Ethyl cyanoacrylate
Viscosity at 25^o C: 20,000 to 40,000 cP
Specific gravity: 1.10 gm/ml
Operating temperature: up to 100^o C
Gap fill: 0.05 mm
Cure Speed: Metal to Metal < 10 Seconds, Plastic to Plastic < 5 Seconds, Rubber to Rubber < 5 Seconds

Fevikwik 702

Jindal — Thu, 04 Jan 2018 08:50:10 +0000

Fevikwik 702 is a medium viscous, multipurpose cyanoacrylate adhesive with medium setting velocity. It has high strength and good resistance to motor oil, gasoline, and alcohols.

Features

Single component
Multipurpose adhesive
High strength
Good resistance to motor oil, gasoline, and alcohols

Technical Specification

Appearance: Clear transparent liquid
Viscosity: Approximately 80 to 120 cP
Gap fill: 0.15 mm
Flash point: Minimum 85° C
Shelf life: 9 months
Specific gravity: 1.06
Shear strength MS to MS: 100 kg/cm²
Operating temperature: -40 to 80° C
Full cure time: 24 hours

Fevikwik 701

Jindal — Thu, 04 Jan 2018 08:46:59 +0000

Fevikwik 701 is a medium viscous, cyanoacrylate adhesive with medium setting velocity.

Features

Single component
Instant bonding
Multipurpose

Technical Specification

Appearance: Clear, transparent liquid
Viscosity: Approximately 10 to 30 cP
Specific gravity: Approximately 1.06
Flash point: Minimum 85° C
Gap fill: 0.05 mm
Shelf life: 9 months
Shear strength MS to MS: 100 kg/cm²
Cure speed: Minimum 10 seconds
Operating temperature : -40 to 80° C
Full cure time: 24 hours

Fevikwik 495

Jindal — Thu, 04 Jan 2018 08:45:00 +0000

Fevikwik 495 is a medium viscous, instant bonding, multipurpose cyanoacrylate adhesive.

Features

Instant bonding
Multipurpose adhesive

Technical Specification

Appearance: Clear transparent liquid
Viscosity: Approximately 40 to 50 cP
Specific gravity: 1.05
Lap shear strength MS to MS: 85 kg/cm²
Lap shear strength PVC to PVC: 70 kg/cm²
Lap shear strength ABS to ABS: 30 kg/cm²
Operating temperature: -50 to 80° C
Flash point: Minimum 85° C
Gap fill: 0.1 mm
Full cure time: 24 hours

Fevikwik 430

Jindal — Thu, 04 Jan 2018 08:42:21 +0000

Fevikwik 430 is a medium viscosity, fast setting methyl cyanoacrylate adhesive. It is specially made for metal bonding.

Features

Specially designed for metal bonding
Medium viscosity
Fast setting

Technical Specification

Appearance: Clear liquid
Chemical type: Methyl cyanoacrylate
Viscosity: 60 to 100 cP
Specific gravity: 1.1
Service temperature range: -55 to 82° C
Gap fill: 0.08 mm

Fevikwik 415

Jindal — Thu, 04 Jan 2018 08:35:30 +0000

Fevikwik 415 is a general purpose adhesive especially formulated for bonding metal substrates.

Features

Single component
Solventless
Does not require catalyst, heat, or clamps

Technical Specification

Base: Methyl cyanoacrylate
Appearance: Clear to hazy colourless liquid
Viscosity: Approximately 900 to 1600 cP
Specific gravity: Approximately 1.10
Refractive index: 1.439 nD²°
Vapor pressure: Maximum 1 hPa
Operating temperature : -50 to 80° C

Fevikwik 406

Jindal — Thu, 04 Jan 2018 07:59:34 +0000

Fevikwik 406 is a medium viscous, fast setting cyanoacrylate adhesive designed to bond plastics and elastomeric materials that require very quick fixtures.

Features

Colorless
Fast setting

Technical Specification

Appearance: Cleartransparent liquid
Viscosity: Approximately 20 to 30 cP
Specific gravity: Approximately 1.06
Lap shear strength MS to MS: 80 kg/cm²
Lap shear strength PVC to PVC: 40 kg/cm²
Lap shear strength ABS to ABS: 40 kg/cm²
Operating temperature : -50 to 80° C
Flash point: Minimum 85° C
Gap fill: 0.1 mm
Cure speed: Minimum 5 seconds
Full cure time: 24 hours