Industrial Bonding Solutions – Jindal Chemicals https://www.jindalchemicals.com Jindal Chemicals Website Tue, 30 Jan 2018 11:43:02 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://www.jindalchemicals.com/wp-content/uploads/2019/09/cropped-JC-LOGO-32x32.jpg Industrial Bonding Solutions – Jindal Chemicals https://www.jindalchemicals.com 32 32 Fevicol Aquagreen 101 https://www.jindalchemicals.com/product/fevicol-aquagreen-101/ https://www.jindalchemicals.com/product/fevicol-aquagreen-101/#respond Thu, 04 Jan 2018 10:09:49 +0000 http://www.jindalchemicals.com/?post_type=product&p=5523 Fevicol Aquagreen 101 is a water based adhesive. It is a dispersion of synthetic rubber/acrylic resin. It has excellent flow and spreadability.

Features

  • Solvent free
  • Non-toxic
  • Non-hazardous
  • Non-flammable
  • Free from offensive odour
  • Shifting and alignment of surfaces is possible
  • Excellent flow and spreadability

Technical Specification

  • Appearance: Water based emulsion
  • Solid content: 48 to 50 %
  • Viscosity: 2 to 7 P
  • Open time: 5 to 30 minutes
  • Density: 1.06 ± 0.04 gm/ml
  • Application: Both sides of the substrate
  • Handing time: 30 minutes after bonding
  • Full curing time: 24 hours
  • Coverage: Approximately 12 to 13 m²/l
  • Softening temperature: 85° C
]]> https://www.jindalchemicals.com/product/fevicol-aquagreen-101/feed/ 0 Fevicol 102 https://www.jindalchemicals.com/product/fevicol-102/ https://www.jindalchemicals.com/product/fevicol-102/#respond Thu, 04 Jan 2018 10:07:43 +0000 http://www.jindalchemicals.com/?post_type=product&p=5521 Fevicol 102 is a ready to use synthetic resin based adhesive. It can be thinned to required viscosity by adding clean water with continuous stirring to get homogeneous emulsion.

Features

  • Solvent free
  • Non-hazardous, non-flammable
  • Free from offensive odour
  • Diluted with clean water
  • Shifting and alignment of surfaces is possible
  • Best flow and spreadability
  • Superior bond compared to any similar brand
  • Heat resistance in normal case
  • Easily applicable by brush, roller, spreader, or by finger

Technical Specification

  • Appearance: Milky white viscous paste
  • Viscosity: 200 to 300 P
  • pH: 4 to 6
  • Odour: Characteristic
  • Flow: Continuous
  • Spreadability: Smooth and easy
]]> https://www.jindalchemicals.com/product/fevicol-102/feed/ 0 Fevicol SP3 FS https://www.jindalchemicals.com/product/fevicol-sp3-fs/ https://www.jindalchemicals.com/product/fevicol-sp3-fs/#respond Thu, 04 Jan 2018 10:02:19 +0000 http://www.jindalchemicals.com/?post_type=product&p=5517 Fevicol SP3 FS is a fast drying, high tack synthetic rubber based solvent borne contact adhesive. It has high strength bonding.

Features

  • Multipurpose adhesive
  • Dries to a tough flexible film
  • Excellent initial grab
  • High strength bonding
  • Good contact capability

Technical Specification

  • Appearance: Light yellow liquid
  • Solid content: 16 %
  • Viscosity: 200 to 400 cP
  • Drying time at 25 to 30° C: 30 to 40 seconds
  • Drying time at 30 to 35° C: 20 to 30 seconds
  • Drying time at 35 to 45° C: 10 to 20 seconds
  • Track retention time: Maximum 10 minutes
  • Peel strength: Minimum 0.5 kg/inch
  • Serve condition: 5 to 80° C
]]> https://www.jindalchemicals.com/product/fevicol-sp3-fs/feed/ 0 Fevicol SP3 https://www.jindalchemicals.com/product/fevicol-sp3/ https://www.jindalchemicals.com/product/fevicol-sp3/#respond Thu, 04 Jan 2018 10:01:09 +0000 http://www.jindalchemicals.com/?post_type=product&p=5515 Fevicol SP3 is a fast drying, high tack, synthetic rubber based, solvent borne contact adhesive. It has excellent contact capability and high initial strength.

Features

  • Multipurpose adhesive
  • Dries to a tough flexible film
  • Resistance to heat
  • High initial strength
  • Good contact capability

Technical Specification

  • Appearance: Light yellow liquid
  • Solid content: 16 %
  • Viscosity: 200 to 400 cP
  • Drying time: Maximum 2 to 3 minutes
  • Track retention time: Maximum 10 minutes
  • Peel strength: Minimum 0.5 kg/inch
]]> https://www.jindalchemicals.com/product/fevicol-sp3/feed/ 0 Fevicol SP-6 https://www.jindalchemicals.com/product/fevicol-sp-6/ https://www.jindalchemicals.com/product/fevicol-sp-6/#respond Thu, 04 Jan 2018 09:58:12 +0000 http://www.jindalchemicals.com/?post_type=product&p=5513 Fevicol SP-6 is a synthetic rubber based, solvent borne contact adhesive. It has good resistance to heat, fast initial strength, and excellent contact capability.

Features

  • Multipurpose adhesive
  • Dries to a tough flexible film
  • Resistance to heat
  • Fast initial strength
  • Good contact capability

Technical Specification

  • Appearance: Brown liquid
  • Solid content: 21 to 23 %
  • Viscosity: 100 to 250 cP
  • Density: 0.82 to 0.86
  • Dilute/cleaner: Toluene
  • Drying time on tin: Minimum 3 minutes
  • Tack retention time: Minimum 30 minutes
  • Peel strength: Minimum 1.5 kg/inch
]]> https://www.jindalchemicals.com/product/fevicol-sp-6/feed/ 0 Fevicol SP-5 M https://www.jindalchemicals.com/product/fevicol-sp-5-m/ https://www.jindalchemicals.com/product/fevicol-sp-5-m/#respond Thu, 04 Jan 2018 09:56:00 +0000 http://www.jindalchemicals.com/?post_type=product&p=5511 Fevicol SP-5 M is a synthetic rubber based, solvent borne contact adhesive. It has good resistance to heat, fast initial strength, and excellent contact capability.

Features

  • Multipurpose adhesive
  • Dries to a tough flexible film
  • Resistance to heat
  • Fast initial strength
  • Good contact capability

Technical Specification

  • Appearance: Pale yellow liquid
  • Solid content: 19 to 20 %
  • Viscosity: 80 to 150 cP
  • Dilute/cleaner: Toluene
  • Drying time: Maximum 2 to 3 minutes
  • Tack retention time: Minimum 30 minutes
  • Softening temperature: Minimum 105° C
  • Peel strength: Minimum 1.2 kg/inch
]]> https://www.jindalchemicals.com/product/fevicol-sp-5-m/feed/ 0 Fevicol SP-4 HL https://www.jindalchemicals.com/product/fevicol-sp-4-hl/ https://www.jindalchemicals.com/product/fevicol-sp-4-hl/#respond Thu, 04 Jan 2018 09:53:09 +0000 http://www.jindalchemicals.com/?post_type=product&p=5509 Fevicol SP-4 HL is a synthetic rubber (polychloroprene) based adhesive with excellent coverage, faster bonding, and high productivity.

Features

  • Non-hazardous to health
  • Excellent coverage
  • Faster bonding
  • High productivity
  • Mild odour
  • Good resistance to heat and aging
  • Fast initial strength
  • Good contact capability

Technical Specification

  • Appearance: Light yellowish liquid
  • Viscosity: 100 to 200 cP
  • Specific gravity: 0.82 g/l
  • Solid content: 16.8 to 17.8 %
  • Dilute/cleaner: Toluene
  • Drying time: Maximum 3 minutes
  • Track retention time:15 to 20 minutes
  • Operating temperature: -20 to 80° C
]]> https://www.jindalchemicals.com/product/fevicol-sp-4-hl/feed/ 0 Fevicol SP 11 https://www.jindalchemicals.com/product/fevicol-sp-11/ https://www.jindalchemicals.com/product/fevicol-sp-11/#respond Thu, 04 Jan 2018 09:50:28 +0000 http://www.jindalchemicals.com/?post_type=product&p=5506 Fevicol SP 11 is a synthetic rubber based, solvent containing contact adhesive. It has excellent coverage, faster bonding, and high productivity.

Features

  • Non-hazardous to health
  • Excellent coverage
  • Faster bonding
  • High productivity
  • Mild odour
  • Good resistance to heat and aging
  • Fast initial strength
  • Good contact capability

Technical Specification

  • Appearance: Light yellowish liquid
  • Viscosity: 100 to 300 cP
  • Specific gravity: 0.82 g/l
  • Solid content: 21 %
  • Dilute/cleaner: Toluene
  • Drying time: 1 to 2 minutes
  • Tack retention time: 15 minutes
  • Operating temperature: -20 to 80° C
  • Coverage: 7 to 8 per m²
]]> https://www.jindalchemicals.com/product/fevicol-sp-11/feed/ 0 Fevicol701 IS https://www.jindalchemicals.com/product/fevicol701-is/ https://www.jindalchemicals.com/product/fevicol701-is/#respond Thu, 04 Jan 2018 09:46:36 +0000 http://www.jindalchemicals.com/?post_type=product&p=5504 Fevicol701 IS is sprayable synthetic rubber based solvent containing contact adhesive. The adhesive dries to a tough flexible film with good resistance to heat and aging.

Features

  • Good resistance to heat and ageing
  • Fast initial strength
  • Good contact capability
  • Multipurpose adhesive

Technical Specification

  • Appearance: Clear to slight hazy yellow liquid
  • Solid content: 34 to 36 %
  • Viscosity: 0.7 to 1 P
  • Density: 0.7 to 0.9 g
  • Peel strength: 1.8 to 2.5 kg/inch
  • Diluent/cleaner: Toluene
  • Drying time: 10 to 180 s
  • Tack retention time: Maximum 30 minutes
  • Operating temperature: -20 to 75° C
]]> https://www.jindalchemicals.com/product/fevicol701-is/feed/ 0 Fevicol SR 998 IS https://www.jindalchemicals.com/product/fevicol-sr-998-is/ https://www.jindalchemicals.com/product/fevicol-sr-998-is/#respond Thu, 04 Jan 2018 09:44:09 +0000 http://www.jindalchemicals.com/?post_type=product&p=5502 Fevicol SR 998 IS is a synthetic rubber based solvent containing contact adhesives specially designed for the industrial segment. It exhibits excellent bonding strength. It dries to a tough, flexible film with good resistance to water and aging. It can be applied by brush or roller coater.

Features

  • Free from benzene (non-hazardous to health)
  • Excellent strength
  • Preferred by the users dealing only in quality works

Technical Specification

  • Appearance: Dark brown liquid
  • Solid contents: 23%
  • Viscosity: 20 to 25 P
  • Specific gravity: 0.85 to 0.90
  • Diluent/cleaner: Toluene
  • Flash point: 0 to 4° C
  • Drying time: Approximately 5 to 10 minutes
  • Tack retention time: 45 minutes
]]> https://www.jindalchemicals.com/product/fevicol-sr-998-is/feed/ 0